Read technical documents online and download the source files for the models and configurations they cover.
Load labels and ribbon through the marked paths for the installed media-handling mode. Calibrate the media and check that a feed positions one label correctly before running RFID tag calibration.
The family specification includes different widths, printhead resolutions and installed options. Match the delivered ZT411 or ZT421 and RFID option before choosing media or assigning a series-level maximum to one printer.
The reviewed sheet concerns a dual-frequency adhesive label, not an external reader antenna. Select the roll and conversion format for the intended printer or application and verify the actual inlay before encoding.
The RIRW27B hardware sheet describes multiple external-interface options. Confirm the interface and supply arrangement of the delivered unit before applying the Type-C-only setup described for a different tabletop model.
The RIRW27B hardware sheet describes multiple external-interface options. Confirm the interface and supply arrangement of the delivered unit before applying the Type-C-only setup described for a different tabletop model.
Although one bilingual heading says ceiling antenna, the matched model table and hardware sheet describe a tabletop near-field reader for registration and conversion. Use that device identity when planning the workstation.
Although one bilingual heading says ceiling antenna, the matched model table and hardware sheet describe a tabletop near-field reader for registration and conversion. Use that device identity when planning the workstation.
The source combines a four-port fixed-reader section with a separate panel-antenna section. Reader communication interfaces and GPIO describe the controller; the antenna's mounting and environmental claims must not be assigned to the reader enclosure by default.
The demonstration application exposes tag memory operations as well as ordinary inventory. EPC, TID, user and reserved memory have different permissions; a successful inventory read does not mean every bank is writable.
The platform is intended for close-range tag conversion and data entry. Keep the target tag in the controlled work area and use filtering in the host application where other tagged items are nearby.
A successful media calibration establishes label positioning for the gap or mark sensor. It does not establish an RFID write position: run the applicable RFID calibration for the selected inlay and confirm the resulting EPC or TID through a read test.
A successful media calibration establishes label positioning for the gap or mark sensor. It does not establish an RFID write position: run the applicable RFID calibration for the selected inlay and confirm the resulting EPC or TID through a read test.
For thermal-transfer work, load the ribbon supply and rewind spools, remove slack and close the print mechanism. Load the selected labels through the correct sensor path and confirm that a feed advances them to the intended print position.
The bilingual sheet describes the RIRP02 printer's media, ribbon and interface configuration. Confirm the housing and supply rating of the delivered unit because the archive also contains a longer manual and later hardware sheet with differing details.
The RIA17 specification describes an integrated UHF reader and antenna for ceiling-mounted monitoring. Determine which tag reads should enter inventory and which should trigger an alarm in the host application.
The RIA17 specification describes an integrated UHF reader and antenna for ceiling-mounted monitoring. Determine which tag reads should enter inventory and which should trigger an alarm in the host application.
The RIA17 specification describes an integrated UHF reader and antenna for ceiling-mounted monitoring. Determine which tag reads should enter inventory and which should trigger an alarm in the host application.
The infrared trigger initiates the gate's read or entry/exit-counting task. A passage trigger does not by itself indicate that merchandise is authorized; the online or offline EAS workflow must evaluate the relevant tags.
The infrared trigger initiates the gate's read or entry/exit-counting task. A passage trigger does not by itself indicate that merchandise is authorized; the online or offline EAS workflow must evaluate the relevant tags.
The ceiling terminal's tag filtering and RSSI functions are tools for the connected application to control which reads enter the business workflow. Test the real tagged items at the edge of the intended area instead of assuming the ceiling position alone defines the read boundary.
The embedded recognition frame can provide item reads for retail checkout or controlled material issue. Define its read area using the actual tagged goods so that nearby stock is not included unintentionally.
The embedded recognition frame can provide item reads for retail checkout or controlled material issue. Define its read area using the actual tagged goods so that nearby stock is not included unintentionally.
The source table explicitly identifies RIA20 even though the archived filename begins RAC07. Treat the ordering-code table as the applicability evidence; RAC07 is not introduced as another product alias.
Tell us the product model, hardware version and the information you need.
