RIRW27 tabletop-reader hardware specification - prepared reference
Although one bilingual heading says ceiling antenna, the matched model table and hardware sheet describe a tabletop near-field reader for registration and conversion. Use that device identity when planning the workstation.
Applicability
RIRW27 tabletop UHF reader. The erroneous generic ceiling-antenna heading is not an installation recommendation.
RIRW27 tabletop-reader hardware specification
Although one bilingual heading says ceiling antenna, the matched model table and hardware sheet describe a tabletop near-field reader for registration and conversion. Use that device identity when planning the workstation.
The hardware sheet describes Type-C connection without a separate supply. Confirm that the host recognizes the delivered interface, then use the application to verify the target tag after reading or rewriting; indicator feedback alone is not the complete host-record check.
Before handover
- Confirm the supplied interface and supported host application.
- Verify the intended tag and business record at the actual read boundary.
Document information
This is an independently prepared English reference based on the reviewed technical material. It is not a manufacturer-issued original, does not replace the delivered hardware instructions and does not add a manufacturer warranty or certification.
