RIRP02 RFID Printers & Encoders
Media setup and RFID calibration
For thermal-transfer printing, fit the ribbon supply and rewind spools, take up slack and close the print mechanism and cover. Connect the supplied adapter and the selected host interface.
Calibrate media after initial installation, sensor cleaning, a media change or unreliable mark detection. Media calibration and RFID calibration serve different purposes.
RFID calibration determines the tag antenna position and operating power. Use the RFID data-reading mode to check EPC or TID, then return to the normal workflow. If calibration fails, check tag placement and media compatibility.
Separate label sensing from encoding checks
A successful media calibration establishes label positioning for the gap or mark sensor. It does not establish an RFID write position: run the applicable RFID calibration for the selected inlay and confirm the resulting EPC or TID through a read test.
If labels stop in the wrong position after a media change or sensor cleaning, revisit media sensing before changing RFID power. If print placement is correct but encoding fails, review tag location and RFID-media compatibility rather than assuming that ribbon setup is the cause.
Technical specifications
| Print Method | Thermal transfer / direct thermal |
|---|---|
| Resolution Options | 203dpi / 300dpi; current SKU 300dpi |
| Print Speed (non-encoding area) | 200mm/s (203dpi); 150mm/s (300dpi) |
| Print Width | 108mm (203dpi); 106mm (300dpi) |
| Print Length | 2286mm (203dpi); 1524mm (300dpi) |
| Memory | 128MB RAM / 256MB flash |
| RFID Engine | Impinj E-series module |
| RFID Frequency (regional options) | 920–925 / 902–928 / 865–868MHz |
| RFID Protocol | EPC C1G2 / ISO 18000-6C |
| Dimensions (matching specification) | 293×237×180mm |
| Weight (matching specification) | 2.9kg |
| Display | 3.5-inch colour touchscreen |
| Standard Interfaces | USB-B / USB Host / Ethernet |
| Optional Interfaces | Wi-Fi / Bluetooth 4.0 or BLE; confirm supplied module |
| Media Thickness | 60–250µm |
| Maximum Roll Diameter | 127mm |
| Media Core Diameters | 12.7 / 25.4 / 38mm |
| Ribbon Types | Wax / wax-resin / resin |
| Ribbon Width | 30–110mm |
| Maximum Ribbon Length | 300m |
| Printer Languages | ZPL-II / EPL2 / DPL / TSPL compatibility |
| Adapter Input | 100–240V AC, 50/60Hz |
| Adapter Output (manual / Chinese specification) | 24V DC / 2.5A; use supplied adapter |
| Operating Temperature / Humidity | 5–40°C / 30–85%RH, non-condensing |
| Storage Temperature / Humidity | −20 to 50°C / 10–90%RH, non-condensing |
Available configurations
| Item code | Configuration | Inquiry |
|---|---|---|
| SKU 010200007 | CP30, thermal transfer/thermal sensitive, 128MB RAM + 256MB Flash, UHF ISO18000-6C), 300dpi, USB Hos, Type-B USB, Ethernet port interface, with Wi-Fi module |
Request a Quote
Ask about pricing, samples or the configuration for your market. You can send an inquiry before choosing a configuration.
RIRP02 RFID Printers & Encoders
