RS5002 RX3000 receiver adjustment - prepared reference
Use the receiver's power, interference, alarm and RF-level indications to establish the site state. The RX3000 guide separates receiver gain from the alarm threshold; a change to either needs a real label test.
Applicability
RS5002 RX3000 receiver component only. Use a separate TX3000 reference for the transmitter.
RX3000 receiver adjustment
Use the receiver's power, interference, alarm and RF-level indications to establish the site state. The RX3000 guide separates receiver gain from the alarm threshold; a change to either needs a real label test.
The receiver reference is not a TX3000 transmitter wiring guide. Confirm sweep and synchronization with the installed transmitter before diagnosing a weak receiver response or replacing components.
Before handover
- Identify the controller and revision before applying a menu or wiring reference.
- Test the actual tags with normal store equipment operating, then retain the accepted settings.
Document information
This is an independently prepared English reference based on the reviewed technical material. It is not a manufacturer-issued original, does not replace the delivered hardware instructions and does not add a manufacturer warranty or certification.
